|Fire Class||B, C, D, K, A|
|Type||Water CO2 Type, CO2 Based, Mechanical Foam (Afff) Based, Modular Automatic Type, A B C Dry Powder Type|
|Capacity||4Kg, 2Kg, 5Kg, 4.5Kg, 3Kg|
|Service Duration||Same day|
|Completion Time||1 working daay|
|Fire Extinguisher Type||Dry Powder Base, Foam Base, CO 2 Base|
The Fire Extinguisher discharged / fired and emptied by Machine.
The extinguisher is then dismantled completely; cylinder is de-stressed.
The cylinder undergoes
the fresh painting process by first, Static Charge Powder coating and then baking in Oven at 180 degrees for 15 minutes. This results into a super fine quality and durable new paint surface on the cylinder.
New extinguishing agent (powder, gas, water or foam) is filled in the cylinder through a vacuum based process that fills the cylinder with exact quantity of extinguishing agent.
New Discharge fitment mechanism including all new rubber seals, O rings,
and hose pipe (EPDM with 50 kg burst capacity) are attached.
Fire extinguisher is charged pressurized) with 99.99% pure nitrogen mixed with helium.
The Fire Extinguisher is then
made to go through Leak tests. The first is an inverted beaker test in water. The extinguishers also undergo a Mass Spectro Meter Helium Leak Detection Test which is the most advanced leak detection technology available currently in the world.